Water Dispenser 100K Flanged Temperature Sensors Air Fryer MFT-F17 Series

100K Temperature Sensor for Water Dispenser, Electric Oven, Microwave Oven, Air Fryer MFT-F17 Series

Brief Introduction:

MFT-F17 series uses food-grade SS304 tube for food safety and uses epoxy resin with excellent performance of moisture-resistant for an encapsulation.

The products can be designed ccording to your every single requirement, which included dimensions, appearance, cable and characteristics and so on.

The custom-built products can help user have a better installation and use, especially the one with flange. The series have high stability, reliability and sensitivity.

Features:

1. Easy to install, and the products can be customized according to your every single requirement
2. High precision of Resistance value and B value, good consistency and stability
3. Moisture and high temperature resistance, wide range of applications
4. Excellent performance of voltage resistance
5. Products are in accordance with the RoHS, REACH certification
6. The SS304 material which connected the food directly can meet the FDA and LFGB certification

Applications:

■ Water dispenser, drinking fountain

■ Electric oven, Air Fryer , Electric Baked Plate
■ Heaters and Air Cleaners (inside ambient)

■ Microwave oven chambers (air & vapor)
■ Vacuum cleaners (solid)

Characteristics:

1. Recommendation as follows:
R25℃=10KΩ±1% B25/50℃=3950K±1% or
R25℃=50KΩ±1% B25/50℃=3950K±1%
2. Working temperature range:
-30℃～+105℃ or

-30℃～+150℃
3. Thermal time constant: MAX.10sec.( typical in stirred water )

4. Insulation voltage: 1800VAC,2sec.
5. Insulation resistance: 500VDC ≥100MΩ
6. Teflon cable or XLPE cable is recommended
7. Connectors are recommended for PH, XH, SM, 5264 and so on
8. Above characteristics all can be customized

Dimensions:

Product specification:

Water Dispenser Flanged Temperature Sensors

Flanged Temperature Sensors 100K

Flanged 100k ohm ntc thermistor

Water Dispenser 100K Flanged Temperature Sensors Air Fryer MFT-F17 Series Images